Heavy Duty Split Charge Kit with 100amp Heavy Duty Relay + 110amp Cable - Simply Split Charge

Heavy Duty Split Charge Kit with 100amp Heavy Duty Relay + 110amp Cable

£50.00 GBP

Price Includes VAT.

SKU: SCKC241

12v Split charge relay system supplied with a 100amp ignition switched realy, 110amp 16mm² cable plus everything you will need to install this system into an older Campervan, Motorhome, 4x4, Day Van, Mobile workshop, Car or Boat.

In stock
Please Select Kit Length:

Please Select Kit Length
Quantity:

Top quality heavy duty ignition controlled split charge relay kit supplied with 110amp rated power cable 

Suitable to install into Camper Vans, Motor homes, Day Vans, Mobile workshops,Cars and Boats.

All you need to do to install this kit is to connect your Main Starter battery to your leisure battery(s) using all the components supplied and with easy to understand fitting instructions and wiring diagram.

A suitable ignition feed will need to be used to activate the heavy duty 100amp relay and is usually taken from the vehicles ignition warning light feed.

This allows your vehicles charging circuit to charge your leisure battery while your engine is running and to isolate both your main starter battery and your leisure battery(s) when your engine is stopped. This will ensure your starter battery does not get drained and you will always be able to start your vehicle.

For modern vehicles with a smart alternator - Intelligent smart charging vehicles with Euro 5-6 engines you will need to use a DC to DC charger.

You will be supplied with everything you need to fit this kit

Specifications + Parts List

  • 12v Heavy Duty 100amp relay.
  • 1-10mtr 110amp 16mm2 red cable to charge your leisure battery(s)
  • 1mtr 110amp 16mm2 black cable to earth your leisure battery(s)
  • 2mtrs 9amp red cable to switch your relay on.
  • 2mtrs 9amp black cable to earth your relay.
  • 1 x pair 8mm post type battery terminals
  • 2 x Fuse holders & Fuses including a 2 spares.
  • Crimp or Solder Terminals to connect everything together.
  • Heat shrink to protect all the connections.
  • 15 x Cable ties + 10 x adhesive cable tie fixings to keep everything tidy.
  • 15 x fixing screws
  • Drill bit
  • 2 x sticky pads to use if required
  • 2mtrs Split conduit to protect cables in Engine bay.
  • Easy to understand Fitting Instructions, wiring Diagram + after sales support if required