3mtr Medium Duty Split Charge Kit with 100amp Heavy Duty Relay + 70amp Ready Made Leads

3mtr Medium Duty Split Charge Kit with 100amp Heavy Duty Relay + 70amp Ready Made Leads

Top quality medium duty split charge relay system supplied with a 12 volt 100amp ignition switched relay and ready made 70amp 10mm2 leads to simply install and safely charge up to 120ah leisure battery(s).

Suitable to install into most Camper Vans, Motor homes, 4x4s, Day Vans, Mobile workshops, Cars and Boats.

You will be supplied with everything you need to fit this kit

• 12v Heavy Duty 100amp relay.
• 1 x 250mm 70amp Red Starter Battery to fuse box lead. (8mm to 6mm terminals)
• 1 x 500mm 70amp Red Fuse box to relay lead (6mm to 6mm terminals)
• 1 x 2000mm 70amp Red Relay to fuse box lead (6mm to 6mm terminals)
• 1 x 250mm 70amp Red Fuse Box to Leisure Battery Lead (6mm to 8mm terminals)
• 1 x 1000mm 70amp Black Earth Cable. (8mm to 10mm terminals)
• Positive & Negative 8mm post type battery terminals
• 2mtrs 9amp red cable to switch your relay on.
• 2mtrs 9amp black cable to earth your relay.
• 1 x Fuse holder & 60amp Fuses including 2 spares.
• Spare Terminals + Heat Shrink.
• 15 x Cable ties + 10 x adhesive cable tie fixings to keep everything tidy.
• 15 x fixing screws
• Drill bit
• 2 x sticky pads to use if required
• 2mtrs Split conduit to protect cables in Engine bay.
• Easy to understand Fitting Instructions, wiring Diagram + after sales support if required

Please note: The 3 mtrs of Red cable supplied in this kit are made of the 4 separate leads as described above.

Simple to install kit by connecting your Main Starter battery to your leisure battery(s) using all the high quality components and the ready made supplied leads saving you both time making the leads up and money needing to buy expensive tools. Supplied with easy to understand fitting instructions and wiring diagram.

A suitable ignition feed will need to be used to activate the heavy duty relay and is usually taken from the vehicles ignition warning light feed or any suitable ignition live feed. This allows your vehicles charging circuit to charge your leisure battery while your engine is running and to isolate both your main starter battery and your leisure battery(s) when your engine is stopped. This will ensure your starter battery does not get drained and you will always be able to start your vehicle.

Please note this is not a voltage sensitive relay which can be simpler to install on modern vehicles and a full range can be found on our main Split Charge page

Please note for modern Intelligent smart charging vehicles with Euro cat 5/6 engines you may need to use a DC to DC charger.

For our full range of battery to battery chargers please click HERE

Our aim at Simply Split Charge is to supply you with the best, top quality Split Charge kit available, at the best price we can. All the components in all of our split charge relay Systems are all fully E-approved and Tested top quality UK supplied parts. In all of our kits you will find everything you need plus spares to install any split charge system to any vehicle with our help and support if required.